T<Tnum>

RepCap Settings

# Range: Nr300 .. Nr319
rc = driver.configure.signaling.nradio.cell.timeout.t.repcap_tnum_get()
driver.configure.signaling.nradio.cell.timeout.t.repcap_tnum_set(repcap.Tnum.Nr300)

SCPI Command :

[CONFigure]:SIGNaling:NRADio:CELL:TOUT:T<no>

class TCls

T commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: Tnum, default value after init: Tnum.Nr300

get(cell_name: str, tnum=Tnum.Default) → int

# SCPI: [CONFigure]:SIGNaling:NRADio:CELL:TOUT:T<no>
value: int = driver.configure.signaling.nradio.cell.timeout.t.get(cell_name = 'abc', tnum = repcap.Tnum.Default)


    INTRO_CMD_HELP: Configures one of the following timers:

    - T300, RRC connection establishment
    - T301, RRC connection re-establishment, after cell selection
    - T310, detection of radio link failure (out-of-sync)
    - T311, RRC connection re-establishment, before cell selection
    - T319, RRC connection resume

    :param cell_name: No help available
    :param tnum: optional repeated capability selector. Default value: Nr300 (settable in the interface 'T')
    :return: timer: Timeout value

set(cell_name: str, timer: int, tnum=Tnum.Default) → None

# SCPI: [CONFigure]:SIGNaling:NRADio:CELL:TOUT:T<no>
driver.configure.signaling.nradio.cell.timeout.t.set(cell_name = 'abc', timer = 1, tnum = repcap.Tnum.Default)


    INTRO_CMD_HELP: Configures one of the following timers:

    - T300, RRC connection establishment
    - T301, RRC connection re-establishment, after cell selection
    - T310, detection of radio link failure (out-of-sync)
    - T311, RRC connection re-establishment, before cell selection
    - T319, RRC connection resume

    :param cell_name: No help available
    :param timer: Timeout value
    :param tnum: optional repeated capability selector. Default value: Nr300 (settable in the interface 'T')

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.signaling.nradio.cell.timeout.t.clone()